Learn about Lcd video wall

A LCD video wall is also called as the liquid crystal display and it is a complete LCD unit. It not only can be used as an independent display, but also can match into the LCD screen. According to different use demands, it can realize the changeable scaling screen functions: single screen segmentation display, independent single screen display, arbitrary combination display, full-screen LCD splicing, and vertical screen display. An image frame can be used for compensation or covering. It supports roaming of digital signals, scaling stretching, cross-screen display, setting and operation of display pre-planning, and real-time processing of full high definition.

Calculation of the LCD video wall size
The LCD video wall size is calculated by the number of video wall unit(W m* H n) and unit size in accordance with practice. For example, 4 x 3 55” LCD video walls are composed of 4 x 3=12 55” LCD video wall units. The width of 55” LCD video wall units is about 1213mm and their height is about 684mm. The display area of video walls is width 4 x 1213-4852mm and height 3 x 684-2052mm.

The wall-mounted installation

It is installed against the wall and has the small occupation space. It is suitable for splicing a small-scale scheme. We suggest that it is used under the circumstance below 3 x 3, because the LCD video wall is directly mounted. Therefore, it has certain requirement for the fixed wall, which must be the load bearing wall. Otherwise, the wall can’t bear it. In addition, there are more LCD video wall units. It is inconvenient for post-maintenance

Floor stand installation

Floor stand needs to reserve more than 65cm of space behind the LCD video wall, so that it is convenient for post-maintenance.
It is suitable for a splicing scheme of the large screen. The entire LCD video wall system is supported by depending on the floor stand, implying that the quality of the floor stand is reliable and bearable. Moreover, the floor installed should be flat. The floor should be strong enough. Furthermore, the best is that the equipment is fixed on the ground of the anti-electrostatic floor to ensure that long-term bearing capacity of the floor is not deformed.

Cabinet installation

Cabinet installation needs to customize a cabinet in accordance with the LCD video wall size. The thickness of a common cabinet is about 60cm, thus it is convenient for people to enter into the cabinet for maintenance. Such an installation mode is simple and magnificent. It is relatively easy to move it in later period.

Embedded installation

Embedded installation means that it is installed in the wall. It seems that it is integrated with the wall. It can be greatly integrated with surroundings and can save more space.